C-Netz: Update anouncement to better quality version

src/liblogging/logging.c

@@ -22,7 +22,6 @@
 #include <errno.h>
 #include <osmocom/core/utils.h>
 #include <osmocom/core/application.h>
-#include <osmocom/cc/misc.h>
 #include "logging.h"
 
 int loglevel = LOGL_INFO;
@@ -249,7 +248,9 @@ void logging_init(void)
 		.num_cat = log_categories_size,
 	};
 
+#ifdef DLCC
 	osmo_cc_set_log_cat(DLCC);
+#endif
 
 	osmo_init_logging2(NULL, &log_info);
 	log_set_print_timestamp(osmo_stderr_target, 0);

src/libserial/serial.c

@@ -29,7 +29,7 @@
 #include "serial.h"
 
 /*
-serial = serial_open("/dev/ttyS0",9600,8,n,1,'d','e',1,2);
+serial = serial_open("/dev/ttyS0",9600,8,'n',1,'d','e',0,1,2);
 
 the return value will be a "serial handle" (!NOT THE FILE HANDLE) for all routines. on failure, a NULL will be returned.
 
@@ -42,6 +42,7 @@ char parity;		n=no,e=even,o=odd
 int stopbits;		1-2
 char xonxoff;		e=disable,e=enable
 char rtscts;		e=disable,e=enable
+int serial_getbreak	get or ignore break
 float txtimeout;	seconds timeout for transmit
 float rxtimeout;	seconds timeout for receive
 
@@ -121,7 +122,6 @@ serial_t *serial_open(const char *serial_device, int serial_baud, int serial_dat
 		serial->txtimeout = serial_txtimeout;
 		serial->rxtimeout = serial_rxtimeout;
 
-
 		if ((serial->handle = open(serial->device, O_RDWR | O_NONBLOCK)) >= 0) {
 			if (isatty(serial->handle)) {
 				/* get termios */
@@ -235,7 +235,7 @@ reads until buffer "size" has reached or until timeout has occurred.
 "read" gives the number of bytes read.
 */
 
-int serial_read(serial_t *serial, uint8_t *buffer, int size)
+int serial_read(serial_t *serial, uint8_t *buffer, size_t size)
 {
 	int n;
 
@@ -259,7 +259,7 @@ writes until buffer "size" has reached or until timeout has occurred.
 "wrote" gives the number of bytes written.
 */
 
-int serial_write(serial_t *serial, uint8_t *buffer, int size)
+int serial_write(serial_t *serial, const uint8_t *buffer, size_t size)
 {
 	int n;
 	fd_set Desc;

src/libserial/serial.h

@@ -24,8 +24,8 @@ typedef struct _serial {
 
 serial_t *serial_open(const char *serial_device, int serial_baud, int serial_databits, char serial_parity, int serial_stopbits, char serial_xonxoff, char serial_rtscts, int serial_getbreak, float serial_txtimeout, float serial_rxtimeout);
 void serial_close(serial_t *serial);
-int serial_read(serial_t *serial, uint8_t *buffer, int size);
-int serial_write(serial_t *serial, uint8_t *buffer, int size);
+int serial_read(serial_t *serial, uint8_t *buffer, size_t size);
+int serial_write(serial_t *serial, const uint8_t *buffer, size_t size);
 int serial_timeout(serial_t *serial, double serial_txtimeout, double serial_rxtimeout);
 int serial_cts(serial_t *serial);
 int serial_dsr(serial_t *serial);