williamp/osmocom-analog
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Implementation of RX level squelch (for A-Netz and B-Netz)

Browse Source 
Use -S <dB> for setting RF level or use -S auto for auto level.

When squelch closes, audio is muted. If squelch is closed for some
seconds (depending on network), call is released. (RF loss condition)

The previous loss detection has been removed
This commit is contained in:
Andreas Eversberg
2017-10-09 20:49:14 +02:00
parent f7a0e4622b
commit b32e0ab602
33 changed files with 310 additions and 263 deletions
Download Patch File Download Diff File Expand all files Collapse all files

23
src/anetz/main.c
View File

@@ -39,7 +39,7 @@
/* settings */
double page_gain = 1;
int page_sequence = 0;
double lossdetect = 0;
double squelch_db = -INFINITY;
void print_help(const char *arg0)
{
@@ -55,9 +55,11 @@ void print_help(const char *arg0)
printf(" -P --page-sequence 0 | <ms>\n");
printf(" Cycle paging tones, rather than sending simultaniously. Try 100.\n");
printf(" (default = '%d')\n", page_sequence);
printf(" -L --loss <volume>\n");
printf(" Detect loss of carrier by detecting steady noise above given volume in\n");
printf(" percent. (disabled by default)\n");
printf(" -S --squelch <dB> | auto\n");
printf(" Use given RF level to detect loss of signal. When the signal gets lost\n");
printf(" and stays below this level, the connection is released.\n");
printf(" Use 'auto' to do automatic noise floor calibration to detect loss.\n");
printf(" Only works with SDR! (disabled by default)\n");
printf("\nstation-id: Give (last) 5 digits of station-id, you don't need to enter it\n");
printf(" for every start of this program.\n");
main_mobile_print_hotkeys();
@@ -73,11 +75,11 @@ static int handle_options(int argc, char **argv)
{"geo", 1, 0, 'G'},
{"page-gain", 1, 0, 'V'},
{"page-sequence", 1, 0, 'P'},
{"loss", 1, 0, 'L'},
{"squelch", 1, 0, 'S'},
{0, 0, 0, 0}
};
main_mobile_set_options("G:V:P:L:", long_options_special);
main_mobile_set_options("G:V:P:S:", long_options_special);
while (1) {
int option_index = 0, c;
@@ -109,8 +111,11 @@ static int handle_options(int argc, char **argv)
page_sequence = atoi(optarg);
skip_args += 2;
break;
case 'L':
lossdetect = atoi(optarg);
case 'S':
if (!strcasecmp(optarg, "auto"))
squelch_db = 0.0;
else
squelch_db = atof(optarg);
skip_args += 2;
break;
default:
@@ -179,7 +184,7 @@ int main(int argc, char *argv[])
/* create transceiver instance */
for (i = 0; i < num_kanal; i++) {
rc = anetz_create(kanal[i], audiodev[i], use_sdr, samplerate, rx_gain, page_gain, page_sequence, do_pre_emphasis, do_de_emphasis, write_rx_wave, write_tx_wave, read_rx_wave, read_tx_wave, loopback, lossdetect / 100.0);
rc = anetz_create(kanal[i], audiodev[i], use_sdr, samplerate, rx_gain, page_gain, page_sequence, do_pre_emphasis, do_de_emphasis, write_rx_wave, write_tx_wave, read_rx_wave, read_tx_wave, loopback, squelch_db);
if (rc < 0) {
fprintf(stderr, "Failed to create \"Sender\" instance. Quitting!\n");
goto fail;