OrcaSlicer-bambulab/resources/profiles/Qidi/filament/Q2/fdm_filament_q_common.json

{
    "type": "filament",
    "name": "fdm_filament_q_common",
    "from": "system",
    "instantiation": "false",
    "activate_air_filtration": [
        "1"
    ],
    "additional_cooling_fan_speed_unseal": [
        "0"
    ],
    "additional_cooling_fan_speed": [
        "0"
    ],
    "bed_type": [
        "Cool Plate"
    ],
    "box_temperature_range_high": [
        "0"
    ],
    "box_temperature_range_low": [
        "0"
    ],
    "box_temperature": [
        "0"
    ],
    "chamber_temperature": [
        "0"
    ],
    "close_fan_the_first_x_layers": [
        "1"
    ],
    "complete_print_exhaust_fan_speed": [
        "0"
    ],
    "cool_plate_temp_initial_layer": [
        "60"
    ],
    "cool_plate_temp": [
        "60"
    ],
    "dont_slow_down_outer_wall": [
        "0"
    ],
    "during_print_exhaust_fan_speed": [
        "100"
    ],
    "enable_pressure_advance": [
        "1"
    ],
    "eng_plate_temp_initial_layer": [
        "60"
    ],
    "eng_plate_temp": [
        "60"
    ],
    "fan_cooling_layer_time": [
        "60"
    ],
    "fan_max_speed": [
        "100"
    ],
    "fan_min_speed": [
        "100"
    ],
    "filament_cost": [
        "0"
    ],
    "filament_density": [
        "1.24"
    ],
    "filament_deretraction_speed": [
        "nil"
    ],
    "filament_diameter": [
        "1.75"
    ],
    "filament_end_gcode": [
        "; Filament-specific end gcode \n;END gcode for filament"
    ],
    "filament_flow_ratio": [
        "0.98"
    ],
    "filament_flush_temp": [
        "0"
    ],
    "filament_flush_volumetric_speed": [
        "0"
    ],
    "filament_long_retractions_when_ec": [
        "nil"
    ],
    "filament_max_volumetric_speed": [
        "24.5"
    ],
    "filament_minimal_purge_on_wipe_tower": [
        "15"
    ],
    "filament_retract_before_wipe": [
        "nil"
    ],
    "filament_retract_restart_extra": [
        "nil"
    ],
    "filament_retract_when_changing_layer": [
        "nil"
    ],
    "filament_retraction_distances_when_ec": [
        "nil"
    ],
    "filament_retraction_length": [
        "nil"
    ],
    "filament_retraction_minimum_travel": [
        "nil"
    ],
    "filament_retraction_speed": [
        "nil"
    ],
    "filament_settings_id": [
        ""
    ],
    "filament_soluble": [
        "0"
    ],
    "filament_start_gcode": [
        "; Filament start gcode"
    ],
    "filament_type": [
        "PLA"
    ],
    "filament_vendor": [
        "QIDI"
    ],
    "filament_wipe_distance": [
        "nil"
    ],
    "filament_wipe": [
        "nil"
    ],
    "filament_z_hop_types": [
        "nil"
    ],
    "filament_z_hop": [
        "nil"
    ],
    "filament_ramming_travel_time": [
        "0"
    ],
    "filament_pre_cooling_temperature": [
        "0"
    ],
    "filament_ramming_volumetric_speed": [
        "-1"
    ],
    "filament_tower_interface_pre_extrusion_dist": ["10"],
    "filament_tower_interface_pre_extrusion_length": ["0"],
    "filament_tower_ironing_area": ["4"],
    "filament_tower_interface_purge_volume": ["20"],
    "filament_tower_interface_print_temp": ["-1"],
    "filament_dev_ams_drying_ams_limitations": ["1"],
    "filament_dev_ams_drying_temperature": ["40.0","40.0","40.0","40.0"],
    "filament_dev_ams_drying_time": ["8.0","8.0","8.0","8.0"],
    "filament_dev_drying_softening_temperature": ["40.0"],
    "filament_dev_ams_drying_heat_distortion_temperature": ["45.0"],
    "filament_dev_drying_cooling_temperature": ["35.0"],
    "filament_dev_chamber_drying_bed_temperature": ["90.0"],
    "filament_dev_chamber_drying_time": ["12.0"],
    "full_fan_speed_layer": [
        "0"
    ],
    "nozzle_temperature_initial_layer": [
        "210"
    ],
    "nozzle_temperature": [
        "210"
    ],
    "overhang_fan_speed": [
        "100"
    ],
    "overhang_fan_threshold": [
        "95%"
    ],
    "pressure_advance": [
        "0.042"
    ],
    "reduce_fan_stop_start_freq": [
        "1"
    ],
    "slow_down_for_layer_cooling": [
        "1"
    ],
    "slow_down_layer_time": [
        "8"
    ],
    "slow_down_min_speed": [
        "20"
    ],
    "temperature_vitrification": [
        "100"
    ],
    "hot_plate_temp_initial_layer": [
        "60"
    ],
    "hot_plate_temp": [
        "60"
    ]
}